We 3D printed a Game of Thrones Crown for cosplay.
The crown was designed by Pipo987 (Stag Crown). The crown was split to print easier. The Gems in the crown was designed by Timograw (Joffrey Crown Gem)
The crown have a diameter of about 220mm (round) and is about 130mm high.
Print Details:
| Material used | PLA (Gold, Transparent Red) |
| Printer Settings | 0.15mm layer height, 3 shells, 15% infill. |
| Printer Used | Wanhao Duplicator 5S Mini |
| Number of Parts | Total: 6 |
| Total Print Time | ~50 hours |
| Weight | ~190g |